Difference between revisions of "Devices pane Old"

Revision as of 07:10, 28 March 2014

Back To Reference Guide

Camera Settings

Exposure

Threshold

LED Intensity

Frame Rate

Camera Settings (Continued)

Tracking Mode: This icon indicates that the camera or camera group is in Tracking mode. Clicking on this will change the camera or camera group to Reference mode.

Reference Mode: This icon indicates that the camera or camera group is in Reference mode, while it is recording video, will not be tracking markers. Clicking on this will set the camera or camera group to Tracking mode.

Gain

Filter Switcher

Video Type

Display Settings

Name

Camera Group Color

@@ Line 1: / Line 1: @@
 [[File:Camera_Pane.png|right|Camera Pane]]
-===Camera Settings===
 [[Motive Reference Guide|Back To Reference Guide]]
-*[[Camera Frame Rate|Frame Rate]]
+'''Camera Settings'''
+*[[Camera Exposure|Exposure]]
+*[[Camera Threshold|Threshold]]
-'''Exposure (EXP):'''  Sets the amount of time that the camera exposes per frame.  The minimum and maximum values will depend on both the type of camera and the frame rate.  Exposure is measured in scanlines for V100 and V120 series cameras, and in microseconds for Flex13, S250e and Prime Series cameras.  Higher exposure will allow more light in, creating a brighter image that can increase visibility for small and dim markers. However, setting exposure too high can introduce false markers, larger marker blooms, and marker blurring--all of which can negatively impact marker data quality.
+*[[Camera Intensity|LED Intensity]]
-'''Threshold (THR):'''  Defines the minimum brightness for a pixel to be seen by a camera, with all pixels below the threshold being ignored.  Increasing the threshold can help filter interference by non-markers (e.g. reflections and external light sources), while lowering the threshold can allow dimmer markers to be seen by the system (e.g. smaller markers at longer distances from the camera).
+*[[Camera Frame Rate|Frame Rate]]
-'''LED Illumination (LED):'''  Sets brightness level for the camera IR LED ring.  Higher LED values allow the camera to emit more IR light, which can allow for better marker detection at longer ranges. However, a value that is too high may cause reflection off of non-marker objects, which can destabilize data.  Generally, the value should be higher for larger volumes and lower for smaller volumes.  Default is dependent on camera model.
 [[File:Camera2.png|thumb|Camera Settings (Continued)]][[File:Tracking_Mode.png|left|Tracking Mode]]'''Tracking Mode:'''  This icon indicates that the camera or camera group is in Tracking mode.  Clicking on this will change the camera or camera group to Reference mode.
@@ Line 16: / Line 17: @@
 [[File:Reference_Mode.png|left|Reference Mode]]'''Reference Mode:'''  This icon indicates that the camera or camera group is in Reference mode, while it is recording video, will not be tracking markers.  Clicking on this will set the camera or camera group to Tracking mode.
+*[[Camera Gain|Gain]]
-'''Gain:'''  Increasing a camera’s gain will brighten the image, which can improve tracking range at very long distances. Higher gain levels can introduce noise into the 2D camera image, so gain should only be used to increase range in very large setup areas, when changing illumination, exposure, and threshold are not sufficient.
+*[[Camera Filter Switch| Filter Switcher]]
-'''Filter Switch :'''  Sets the camera to view either visible or infrared light on cameras equipped with a Filter Switcher. Infrared Spectrum should be selected when the camera is being used for marker tracking applications. Visible Spectrum can optionally be selected for full frame video applications, where external, visible spectrum lighting will be used to illuminate the environment instead of the camera’s IR LEDs. Common applications include reference video and external calibration methods that use images projected in the visible spectrum.
+*[[Camera Video Type|Video Type]]
-'''Video Type:'''  Several modes are available for efficient on-camera image processing. Available modes vary slightly, depending on camera model:
-Object: Performs on-camera detection of marker location, size, and roundness using methods similar to Precision Grayscale (except for V100 and V120 cameras, which use methods similar to Segment). Provides the smallest CPU footprint of all available modes.  Recommended for Prime Series cameras, as well as Flex 13 and S250e cameras when CPU performance is taxed by Precision Grayscale mode (e.g. high camera counts using a less powerful CPU).
-''Precision Grayscale:'' Sends thresholded grayscale images of markers to the PC for calculation of object data. Provides the most verbose marker information, but requires the most CPU resources to process. Recommended for Flex 13, V100, V120, and S250e cameras.
-''Segment:'' Like precision grayscale processing, segment mode divides processing between the camera and CPU, providing a balance between precision and processing load. Recommended for V100 and V120 cameras when CPU performance is taxed by Precision Grayscale mode (e.g. high camera counts using a less powerful CPU).
-''MJPEG-compressed grayscale:'' Full resolution grayscale frames, compressed on-camera for scalable reference video capabilities.
-''Raw grayscale:'' Full resolution, uncompressed grayscale.
-===Display Options:===
-'''Name:'''  Sets the name for the selected camera group.
-'''Camera Color:'''  Sets the color for camera group members as they appear in the 3D viewport.  Color values are input as standard RGB triplets.
-'''Marker Color:'''  Sets the color that markers will be displayed as when they are detected by this camera group. Color values are input as standard RGB triplets.
-'''Visible Cameras:'''  Selects whether cameras in the group are displayed in the viewport.
-'''Numeric LEDs:'''  Selects whether the numeric LED on the front of the camera is on or off.
-'''Show Markers:'''  Selects whether camera group 3D point cloud markers are displayed in the viewport.  Disabling this setting will cause the markers to not appear within the 3D Viewport, even though they are being tracked, and can slightly reduce overhead on the computer if you are limited by physical performance.  Valid options are True (markers are visible) (default), False (markers are hidden).
-'''Show Volume:'''  Selects whether the capture volume (defined as capable of tracking a single marker) is displayed in the viewport.  Enabling this will allow the volume to be displayed as a wire cage around the ground plane where multiple cameras fields of view intersect.  Valid options are True, False (default).
-'''Camera FOV:'''  Selects whether camera FOVs are displayed in the viewport.  Camera FOV accurately depicts the frustum angles, while depth is artificially capped.  Actual depth may vary depending on camera settings and marker size.  Enabling this feature can be beneficial in volume visualization for creation and adjustment.  Valid options are True (default), False.
+'''Display Settings'''
-'''Camera Overlap:'''  Sets the minimum camera overlap necessary for a region to be visualized as part of the capture volume.  Higher numbers represent more camera coverage, but they will tend to reduce the size of the visualized capture volume.  Valid range is 1 to 25 (default 3).
-'''Volume Resolution:'''  Sets the resolution of the capture volume visualization.  A higher number represents a more detailed visualization.  Valid range is 1 to 120 (default 50).
-'''Opacity:'''  Sets the opacity of the volume visualization.  A value of 1 is transparent and 100 is opaque.  Valid range is 1 to 100 (default 100).
-'''FOV Intensity:'''  Sets the opacity of the FOV visualization.  A higher value represents a more opaque volume visualization.  Valid range is 1 to 100 (default 50).
-===Advanced:===
-'''Illumination Type:'''  Sets the illumination to either Strobed or Continuous.  Strobed illumination will output more light with equivalent power when compared to Continuous and is the ideal choice for standard motion capture volumes.  Continuous is ideal for volumes where external IR interference is potentially an issue (e.g. with IR actuated stereovision systems that cannot synchronize to the OptiTrack cameras, or when other volumes may be within line of sight).
-'''Fan Mode:'''   Provides an option to turn off the camera fan during recording, for S250e cameras only.
-'''Point Cloud:'''  Selects which point cloud engine will be used to reconstruct 3D points.  Point cloud engine v1 is recommended for most applications and is particularly well suited for high marker counts and fast movements.  Point cloud engine v2 is more CPU intensive, and is accordingly more susceptible to latency when tracking complex point clouds, but it can produce cleaner data than v1 in smaller scale applications.
-'''Synchronization:'''  Selects which synchronizer will be used.  Synchronizer v2 is the default option, and should be used for optimal performance unless otherwise instructed by the OptiTrack support team.
-'''Synchronization Control:'''  Determines how late camera frames are dealt with. Timely Delivery will drop late frames, which is ideal for real-time applications where data completeness is secondary to timeliness.  Complete Delivery will hold up processing of frames when a frame is late.  Automatic, which is the default and recommended setting, runs in Timely Delivery mode until it gets a non-trivial percentage of late frames, at which point it will automatically switch to Complete Delivery.
+*[[Camera Group Name|Name]]
-'''Shutter Offset:'''  Delays camera group shutter time for N microseconds.
+*[[Camera Group Color]]
-===Block Regions:===
-'''Blocking Width (pixels):'''  Sets the extra pixel coverage (width) for masking visible markers when the block visible function is used.  A larger number will block a wider grouping of pixels simultaneously.  Valid range is determined by the resolution of the cameras.
-'''Blocking Height (pixels):'''  Sets the extra pixel coverage (height) for masking visible markers when the block visible function is used.  A larger number will block a wider grouping of pixels simultaneously.  Valid range is determined by the resolution of the cameras.
+*