Data Streaming Pane
In Motive, the Data Streaming pane can be accessed under the View tab or by clicking icon on the main toolbar.
For explanations on the streaming workflow, read through the Data Streaming page.
The Data Streaming Pane contains advanced settings that are hidden by default. Access these settings by going to the menu on the top-right corner of the pane and clicking Show Advanced and all of the settings, including the advanced settings, will be listed under the pane.
The list of advanced settings can also be customized to show only the settings that are needed specifically for your capture application. To do so, go the pane menu and click Edit Advanced, and uncheck the settings that you wish to be listed in the pane by default. One all desired settings are unchecked, click Done Editing to apply the customized configurations.
- 1 OptiTrack Streaming Engine
- 1.1 Broadcast Frame Data
- 1.2 Local Interface
- 1.3 Labeled Markers
- 1.4 Unlabeled Markers
- 1.5 Asset Markers
- 1.6 Rigid Bodies
- 1.7 Skeletons
- 1.8 Skeleton Coordinates
- 1.9 Skeleton as Rigid Bodies
- 1.10 Bone Naming Convention
- 1.11 Up Axis
- 1.12 Remote Trigger
- 1.13 Type
- 1.14 Stream Subject Prefix
- 1.15 Stream Visual3D Compatible
- 1.16 Scale
- 1.17 Command Port
- 1.18 Data Port
- 1.19 Multicast interface
- 1.20 Multicast as Broadcast
- 2 Trackd Streaming Engine
- 3 VRPN Streaming Engine
OptiTrack Streaming Engine
The OptiTrack Streaming Engine allows you to stream tracking data via Motive's free streaming plugins or any custom built NatNet interfaces. To begin streaming, select Broadcast Frame Data. Select which types of data (e.g. markers, rigid bodies, or skeletons) will be streamed, noting that some third party applications will only accept one type of data. Before you begin streaming, ensure that the network type and interface are consistent with the network you will be streaming over and the settings in the client application.
Broadcast Frame Data
- (Default: False) Enables/disables broadcasting, or live-streaming, of the frame data. This must be set to true in order to start the streaming.
- (Default: loopback) Sets the network address which the captured frame data is streamed to. When set to local loopback (127.0.0.1) address, the data is streamed locally within the computer. When set to a specific network IP address under the dropdown menu, the data is streamed over the network and other computers that are on the same network can receive the data.
- (Default: True) Enables, or disables, streaming of labeled Marker data. These markers are point cloud solved markers.
- (Default: True) Enables/disables streaming of all of the unlabeled Marker data in the frame.
- (Default: True) Enables/disables streaming of the markerset markers, which are named collections of all of the labeled markers and their positions (X, Y, Z). In other words, this includes markers that are associated with any of the assets (MarkerSet, Rigid Body, Skeleton). The streamed list also contains a special marker set named all which is a list of labeled markers in all of the assets in aTake. In this data, skeleton and rigid body markers are point cloud solved and model-filled on occluded frames.
- (Default: True) Enables/disables streaming of rigid body data, which includes the name of rigid body assets as well as positions and orientations of their pivot points.
- (Default: Skeletons) Enables/disables streaming of skeleton tracking data from active skeleton assets. This includes the total number of bones and their positions and orientations in respect to global, or local, coordinate system.
- (Default: Global) When set to Global, the tracking data will be represented according to the global coordinate system. When this is set to Local, the streamed tracking data (position and rotation) of each skeletal bone will be relative to its parent bones.
Skeleton as Rigid Bodies
- [Advanced] (Default: False) When set to true, skeleton assets are streamed as a series of rigid bodies that represent respective skeleton segments.
Bone Naming Convention
- (Default: FBX) Sets the bone naming convention of the streamed data. Available conventions include Motive, FBX, and BVH. The naming convention must match the format used in the streaming destination.
- Note: The default setting for this has been changed to FBX in Motive 2.0.
- (Default: Y Axis) Selects the upward axis of the right-hand coordinate system in the streamed data. When streaming onto an external platform with a Z-up right-handed coordinate system (e.g. biomechanics applications) change this to Z Up.
- (Default: False) Allows using the remote trigger for recording using XML commands. See more: Remote Triggering
- (Default: Multicast) Selects the mode of broadcast for NatNet. Valid options are: Multicast, Unicast.
Stream Subject Prefix
- [Advanced] (Default: True) When set to true, associated asset name is added as a subject prefix to each marker label in the streamed data.
Stream Visual3D Compatible
- [Advanced] Enables streaming to Visual3D. Normal streaming configurations may be not compatible with Visual3D, and this feature must be enabled for streaming tracking data to Visual3D.
- [Advanced] Applies scaling to all of the streamed position data.
- [Advanced] (Default: 1510) Specifies the port to be used for negotiating the connection between the NatNet server and client.
- [Advanced] (Default: 1511) Specifies the port to be used for streaming data from the NatNet server to the client(s).
- [Advanced] Specifies the multicast broadcast address. (Default: 22.214.171.124). Note: When streaming to clients based on NatNet 2.0 or below, the default multicast address should be changed to 126.96.36.199 and the data port should be changed to 1001.
Multicast as Broadcast
- [Advanced] Warning: This mode is for testing purposes only and it can overflood the network with the streamed data. When enabled, Motive streams out the mocap data via broadcasting instead of sending to Unicast or Multicast IP addresses. This should be used only when the use of Multicast or Unicast is not applicable. This will basically spam the network that Motive is streaming to with streamed mocap data which may interfere with other data on the network, so a dedicated NatNet streaming network may need to be set up between the server and the client(s).
- To use the broadcast set the streaming option to Multicast and have this setting enabled on the server. Once it starts streaming, set the NatNet client to connect as Multicast, and then set the multicast address to 255.255.255.255. Once Motive starts broadcasting the data, the client will receive broadcast packets from the server.
Trackd Streaming Engine
For information on streaming data via the Trackd Streaming Engine, please consult the Trackd documentation or contact Mechdyne. Note that only 6 DOF rigid body data can be streamed via Trackd.
TrackD Streaming Engine
- (Default: False) Streams rigid body data via the Trackd protocol.
VRPN Streaming Engine
For information on streaming data via the VRPN Streaming Engine, please visit the VRPN knowledge base. Note that only 6 DOF rigid body data can be streamed via VRPN.