Difference between revisions of "Builder pane"

Line 2: Line 2:
 
----
 
----
  
The Trackables pane can be accessed under the ''View tab'' or by clicking the [[Toolbar_RigidBody_.png]] icon on the main toolbar. The Trackable pane is used for creating trackable models, rigid bodies and skeletons, in Motive. These trackable models, also known as asset definitions, are used for auto-labeling the reconstructed 3D marker, and from these models, Motive can derive 6 degrees of freedom (6 DoF) data from a set of 3D points both in the Live mode (real-time) and in the Edit mode (post-processing). This page goes over each option in the Trackables pane.
+
The Trackables pane can be accessed under the ''View tab'' or by clicking the [[image:Toolbar_RigidBody_.png]] icon on the main toolbar.  
  
 +
=Overview=
 +
----
 +
The Trackable pane is used for creating trackable models (rigid bodies and skeletons) in Motive.
  
 +
Trackable models, also known as assets, stores marker placement
 +
 +
 +
These trackable models, also known as asset definitions, are
 +
 +
are used for auto-labeling the reconstructed 3D markers.
  
=Overview=
 
  
 +
from these models, Motive can derive 6 degrees of freedom (6 DoF) data from a set of 3D points both in the Live mode (real-time) and in the Edit mode (post-processing). This page goes over each option in the Trackables pane.
  
 
=Rigid Body: Create=
 
=Rigid Body: Create=

Revision as of 02:29, 16 May 2018

Main PageTrackables pane

The Trackables pane can be accessed under the View tab or by clicking the Toolbar RigidBody .png icon on the main toolbar.

Overview


The Trackable pane is used for creating trackable models (rigid bodies and skeletons) in Motive.

Trackable models, also known as assets, stores marker placement


These trackable models, also known as asset definitions, are

are used for auto-labeling the reconstructed 3D markers.


from these models, Motive can derive 6 degrees of freedom (6 DoF) data from a set of 3D points both in the Live mode (real-time) and in the Edit mode (post-processing). This page goes over each option in the Trackables pane.

Rigid Body: Create

Rigid Body: Edit

Refine

Probe Calibration

Location

OptiTrack Clip Tool

External Pivot Alignment

Spherical Pivot Placement

Skeleton: Create

Skeleton: Edit